The Dunscombe canopy along with the Filcombe design is very open and holds the most detail in its gently curved eaves which are chamfered down both sides of the timber.
As standard the dimensions are: 1050mm between gallows x 1105mm height x 505mm deep (not including gallows height). This canopy can also be adapted to suit specific requirement - contact us for more details.
Please specify if you would like your canopy supplied with brackets or post legs.
Gallows brackets: Timber size - Vertical 3x2, Horizontal 3x3, Brace 6x2 | Measurements - 510mm depth x 590mm length
Post legs: Timber size - 3x3 | Measuring 2100mm Length
When purchasing this canopy you will receive:
* Front and back truss (already constructed)
* Gallows brackets x 2 (already constructed) OR Post legs x 2 and Side returns x 2
* ply roof x 2
* hand turned finial, pendant cap and top bar.
Fitting instructions will be sent with the delivery note, they can also be found on the Fitting Instructions page.
If you would like to gloss your canopy we can prepare it with an undercoat of white primer for a small additional cost.